After the machine is fully qualified after commissioning to allow the formal production, in order to ensure the long-term safe operation of the machine, special attention should be paid to the correct operation of the machine and routine maintenance and regular maintenance.
1. Preparatory work before the machine is running:
The machine must do adequate preparation and strict inspection before starting the normal operation, the machine itself requires that the parts must be intact, all the fixed bolts and the anchor nut should be firmly tightened, the machine accessory must not have the things and sundries which hinder the operation.
2. The normal operation of the machine:
When the machine is working properly, the operator and the personnel concerned must pay attention to the following matters:
(1) All the fixed bolts are broken and loose phenomenon.
(2) The lubrication of each bearing is normal, there is no oil leakage phenomenon.
(3) Whether the seals are tight, there is no oil leakage phenomenon.
(4) Whether the feed quantity has excessive phenomenon, whether the material size meets the requirement.
(5) The operation of the rollers and gears is normal.
3. Other Precautions:
The direction of rotation of the machine shall not be changed. When the machine is running out of power, the power should be pulled off immediately, so as to avoid the accident when suddenly calling.
Next: No Information
Related Industry Knowledge
- Maintenance and repair of mining machinery
- Development trend of mining machinery
- What is a polishing machine
- Classification of polishing machines
- Main accessories of Polishing machine
- Working principle of polishing machine
- The polishing machine matters needing attention
- Selection of polishing machine note
- What is a diamond bit
- Advantages of Diamond Bit