Fully Automatic Stone Edge Processing Machine

XTJ-200-11C Fully Automatic Stone Edge Processing Machine

XTJ-200-11C is an automatic stone edge processing machine designed for continuous edge shaping, grinding and polishing of marble, granite and other stone materials. It integrates multiple processing steps into one production line, helping fabricators complete complex edge profiles with consistent quality.

Contact Us

KAIDA XTJ-200-11C Automatic Stone Edge Processing Solution

In stone fabrication, edge finishing is an important process that directly affects the appearance and installation quality of finished products. Traditional processing methods often require several separate machines and manual transfers between different working stages.

The XTJ-200-11C is developed to simplify this process by combining edge cutting, forming, grinding and polishing functions in one continuous operation.

With 11 processing heads arranged for different working procedures, the machine can handle various edge designs including round edges, French edges, bevel edges, anti-slip grooves and customized profiles.

Complete Stone Edge Processing In A Continuous Line

Stone edge fabrication usually involves several steps, including material preparation, edge shaping, grinding, polishing and final surface treatment. When these processes are completed separately, operators need to repeatedly move the stone between different machines, which may increase labor requirements and affect production consistency.

The XTJ-200-11C combines multiple edge processing procedures into one machine. After loading the stone material, the equipment can complete shaping, rough grinding, fine grinding and polishing through sequential processing units.

This integrated working method is suitable for factories producing countertops, stair steps, decorative stone components and customized edge profiles.

11 Processing Heads For Different Edge Requirements

Different stone products require different edge designs. A countertop edge, stair anti-slip groove or decorative stone profile may require different grinding and polishing methods.

The XTJ-200-11C is equipped with 11 processing heads, with each unit responsible for a specific machining stage. The combination allows operators to process various edge shapes without frequently changing tools or transferring materials between equipment.

• Back cutting preparation for stone edge processing
• Edge forming for customized profiles
• Grinding and polishing of flat bottom edges
• Chamfering and bevel processing
• Final edge polishing treatment

Processing Various Stone Edge Profiles

The machine can be configured for different stone edge designs according to customer requirements, including:

• Round edge
• French edge
• Straight edge with 45° chamfer
• Upper and lower bevel edge
• Waterfall edge
• Stair anti-slip groove
• Customized decorative profiles

By combining different grinding wheels and polishing tools, XTJ-200-11C provides flexibility for workshops producing different stone products.

Designed For Countertop And Architectural Stone Fabrication

The demand for customized stone products continues to increase, especially in kitchen countertops, bathroom vanity tops, staircases and interior decoration projects.

For these applications, edge quality is not only a functional requirement but also an important part of the final appearance. The XTJ-200-11C helps manufacturers achieve consistent edge finishing while reducing manual processing steps.

Processing Capability For Different Stone Materials

The XTJ-200-11C is suitable for processing:

• Marble
• Granite
• Quartz stone
• Engineered stone
• Other decorative stone materials

Different grinding wheels and polishing consumables can be selected according to material hardness and required surface effect.

Machine Structure Designed For Multi-Step Edge Processing

The XTJ-200-11C is arranged according to the actual sequence of stone edge fabrication. Each processing unit performs a specific function, allowing the material to move through different stages without repeated manual handling.

Back Cutting Unit For Edge Preparation

The first processing unit uses a 300mm diameter saw blade for back cutting preparation. This step removes unnecessary material from the stone edge and creates a suitable base for the following forming processes.

Separating the preparation stage from polishing operations helps improve the overall processing flow and reduces the workload of later grinding units.

Forming Unit For Profile Creation

The forming system works together with multiple swinging units to create different edge profiles according to production requirements.

This configuration allows the machine to process customized edge shapes rather than only standard straight edges, making it suitable for decorative stone fabrication.

Grinding And Polishing Units For Surface Finishing

Several vertical processing heads are arranged for bottom edge grinding, polishing and surface refinement. These units gradually improve the edge condition from rough shaping to final finishing.

The continuous grinding sequence helps achieve a more consistent finish compared with separate manual processing operations.

Adjustable Chamfering Units For Different Edge Angles

The final chamfering units can be adjusted according to different edge designs. The angle range allows the machine to process:

• 45° chamfer edges
• Large bevel edges
• Special irregular edge profiles

This flexibility allows fabricators to produce different styles of finished stone products using one machine platform.

Technical Specification – XTJ-200-11C

Consumable Selection For Different Stone Finishing Requirements

Grinding wheels and polishing tools directly influence the final edge effect. Different stone materials and finishing requirements require suitable consumable combinations.

KAIDA can provide matching grinding wheels, polishing tools and technical recommendations according to the customer's stone type and edge processing requirements.

Why XTJ-200-11C Fits Modern Stone Fabrication

Reduced Transfer Between Different Processing Stages

Traditional edge processing may require several separate machines for cutting, shaping, grinding and polishing. Each transfer increases handling time and requires additional operator involvement.

XTJ-200-11C combines these procedures into one continuous production process, helping workshops simplify workflow and reduce unnecessary material movement.

Consistent Edge Finishing For Repeated Production

For countertop factories and architectural stone producers, maintaining consistent edge appearance across multiple pieces is an important production requirement.

The multi-head processing arrangement allows each stage to work with dedicated tools, helping achieve more uniform edge results during continuous operation.

Suitable For Customized Stone Products

Stone products are becoming increasingly customized, with different customers requiring different edge designs and decorative effects.

With adjustable processing units and different grinding wheel combinations, XTJ-200-11C provides flexibility for producing various stone edge styles.

Practical Maintenance For Long-Term Operation

Regular maintenance helps keep the machine working smoothly in daily production environments. Recommended maintenance includes:

• Cleaning stone dust and residue from working areas
• Checking guide rails and moving components
• Inspecting water supply system
• Checking grinding wheel and polishing tool wear
• Adjusting consumable replacement according to production conditions

Applications Of XTJ-200-11C

XTJ-200-11C is commonly used in:

• Kitchen countertop production
• Bathroom vanity top fabrication
• Marble and granite edge processing
• Stair step manufacturing
• Architectural decorative stone production
• Customized stone projects

Automatic Stone Edge Processing Solution

XTJ-200-11C provides an integrated solution for stone manufacturers who require continuous edge forming and polishing for marble, granite and engineered stone products.

From standard countertop edges to customized decorative profiles, the machine helps fabricators improve production flexibility.

KAIDA Stone Machinery

Fujian Province Kaida Stone Machinery Co., Ltd. is located in Shuitou Town, Nan'an City, Fujian Province, China, one of the important stone industry areas in China.

KAIDA develops and manufactures equipment for stone cutting, edge processing, polishing and CNC fabrication. Based on practical experience from stone processing factories, KAIDA provides machinery solutions for different materials and production requirements.

The company supplies stone processing equipment to customers worldwide and supports users with machine configuration advice, technical guidance and consumable recommendations.

Contact KAIDA

For XTJ-200-11C technical specifications, processing videos, edge profile recommendations or quotation, please contact KAIDA Stone Machinery.

Contact KAIDA For More Information

Email: technic@kaida888.cn
WhatsApp / WeChat / Phone: +86 15960555832

Hot Tags: fully automatic stone edge processing machine, China, manufacturers, suppliers, factory, wholesale, customized, buy, discount, low price, in stock, made in China