Safety operating rules for edge trimming machine：
1. Before starting the equipment, refuel the hand oil pump according to the regulations.
2. Observe whether the bracket of the flashing device fits the bed surface, and notify the mechanic to check if it does not fit.
3. When driving the gear, pay attention to whether the adjustment height of the ejector rod is appropriate. If it is not suitable, it may cause an accident.
4. If it is found that the forging billet is too large and the end flash is too long to collide with the bed, trimming should not be performed.
5. When adjusting the closed height of the slider, pay attention to the ruler so as not to exceed the range.
