For the use of the dust collector, it is mainly installed at the air outlet of the air supply and masterbatch system to prevent polyethylene dust from entering the atmosphere and play a role in environmental protection. The dust collected by the filter at the top of the silo is returned to the product, and finally the product is transported to the storage tank on the packaging or the dust remover on the bulk storage tank to separate the dust from the product. Generally, the structure of the dust collector is mainly divided into box, partition, filter bag, filter bag skeleton, etc. The details are as follows:
1. Box body: shape - round, rectangular; with cone bottom, without cone bottom; some with discharge mechanism. Material: Stainless steel
2. Partition: The partition divides the box into upper and lower parts, and there are circular holes on the partition to install the filter bag
3. Filter bag: material - anti-static, flame retardant non-woven fabric, main technical parameters: filtration accuracy (mesh), filtration area (m)
Fourth, the filter bag skeleton: material - stainless steel. The filtered gas enters from the lower part of the dust collector, the gas flows inward from the outside of the filter bag to the upper part of the dust collector and is discharged, and the dust accumulates on the outer wall of the filter bag.
