Principle Of Water Dust Collector

After the dusty gas enters the equipment from the air inlet at the top of the equipment, it passes through the cyclone separator at high speed, so that the dusty gas rotates downward along the axis adjustment screw, and uses centrifugal force to remove the coarser particles of dust, effectively controlling the initial entry into the electric field. Dust concentration. Then, the gas enters the electric field to work through the lower ash hopper. Because the cross-sectional area of the lower ash hopper is larger than the cross-sectional area of the inner tube, according to the principle of constant rotation torque, the radial wind speed and the axial wind speed are sharply reduced to produce a zero-speed interface and cause The heavy particle dust settles in the lower ash hopper, reducing the dust concentration entering the electric field. The low-concentration dust-containing gas is condensed on the cathode and anode plates by electric dust collection, and the collected dust is discharged by the lock wind after the dust is shaken. The ash device is transported away. In order to prevent the secondary dust formed in the lower ash hopper after the inner tube cyclone and electric field electrode plates are vibrated, an isolation cone is specially provided in the lower ash hopper.